The Convair F-106 Delta Dart was the main all-weather interceptor aircraft operated by the United States Air Force between 1960 to 1980. Built as the reputed Ultimate Interceptor, the aircraft proved to be the final committed interceptor in service with the United States Air Force until today, and slowly retired in the 1980s.

Manufacturer:
Convair
Country:
United States
Manufactured:
1956 to: 1968
ICAO:
F106
Price:
US$4.7 million (1973)
Avionics:
Hughes MA-1 Fire Control System & IBM Semi-Automatic Ground Environment
Engine:
1x Pratt & Whitney J75-P-17
Jet
Power:
24,500 pound-force
Max Cruise Speed:
1325 knots
2,454 Km/h
Approach Speed (Vref):
144 knots
Travel range:
2,346 Nautical Miles
4,345 Kilometers
Fuel Economy:
Service Ceiling:
57,000 feet
Rate of Climb:
30000 feet / minute
152.40metre / second
Take Off Distance:
1280 metre - 4,199.42 feet
Landing Distance:
1341 metre - 4,399.55 feet
Max Take Off Weight:
18,975 Kg
41,832 lbs
Max Landing Weight:
16,021 Kg
35,320 lbs
Max Payload:
4,553 Kg
10,038 lbs
Fuel Tank Capacity:
1,514 gallon
5,731 litre
Baggage Volume:
Seats - Economy / General:
1 seats
Seats - Business Class:
Seats - First Class:
Cabin Height:
Cabin Width:
Cabin Length:
Exterior Length:
21.57 metre - 70.77 feet
Tail height:
6.18 metre - 20.28 feet
Fuselage Diameter:
1.4 metre - 4.59 feet
Wing Span / Rotor Diameter:
11.68 metre - 38.32 feet
Wing Tips:
No Winglets

Blog Mentions

Blog posts that mention the Convair F-106 Delta Dart:

The F-106 was the conclusive development of the WS-201A, informally known as the 1954 interceptor, a United States Air Force project to develop a dedicated interceptor aircraft that would enter service on the said year.

On December 26, 1956, the first F-106 prototype conducted its maiden flight from Edwards Air Force base.

On February 26, 1957, the second prototype took its first flight, equipped with a better set of equipment. Preliminary flight testing during the last quarter of 1956 to the first quarter of 1957 was dissatisfying, with performance below expected, and the engine as well as the avionics system showed unreliability.

The issues, together with the delays correlated, almost ushered to the discontinuation of the project, however, the USAF settled to place an order for three hundred and fifty F-106s rather than the proposed 1,000.

Following few slight reconfigurations, the new aircraft with the designation F-106A, were sent to 15 fighter interceptor squadrons together with the F-106B, beginning in October 1959.

The aircraft was envisioned as a particular all-weather interceptor armed with missiles to assail bombers. It could also be used as a daylight air superiority fighter or a fighter bomber. The F-106 was fitted with the MA-1 fire-control system by Hughes which guides the aircraft into the right position for firing missiles.

This system could be connected to the Semi-Automated Ground Environment (SAGE) network which coordinated and processed data from different radar sites to provide a combined image of the airspace over a wide area and could be used for ground-controlled interception, enabling the F-106 to be maneuvered by controllers.

The F-106A has a length of 21.55 meters, a height of 6.18 meters, and a diameter of 1.4 meters. The wingspan is 11.67 meters and the original wing area is 61.46 square meters while the conically-cambered wing area is 65 square meters. It was powered by a single Pratt and Whitney J75-P-17 afterburning turbojet engine which produces a maximum dry thrust of 16,100 lbf and 24,500 lbf with afterburner.

Want More of This?
We'll send you our latest and best content straight to your inbox
Featured Image

All Convair Aircraft